ALTIQ™ Next-Gen Ranger / Everest OEM+ ControlGrid 6

ALTIQ™ Next-Gen Ranger / Everest OEM+ ControlGrid 6

10"
$103.99 AUD
$103.99 AUD $129.00 AUD
Skip to product information
ALTIQ™ Next-Gen Ranger / Everest OEM+ ControlGrid 6
ALTIQ™ Next-Gen Ranger / Everest OEM+ ControlGrid 6

ALTIQ™ Next-Gen Ranger / Everest OEM+ ControlGrid 6

$103.99 AUD
$103.99 AUD $129.00 AUD
Size

Complete Your Kit:

ALTIQ™ Toyota Square Switch & Accessory Modules – ALTIQ Panel Compatible

Constant / Blue + Orange / Spot Light

$23.99

ALTIQ™ Toyota Square Switch & Accessory Modules – ALTIQ Panel Compatible

ALTIQ™ Toyota Square Switch & Accessory Modules – ALTIQ Panel Compatible

Constant / Blue + Orange / Light Bar

$23.99

ALTIQ™ Toyota Square Switch & Accessory Modules – ALTIQ Panel Compatible

ALTIQ™ Toyota Square Switch & Accessory Modules – ALTIQ Panel Compatible

Constant / Blue + Orange / Smiley Villain

$23.99

ALTIQ™ Toyota Square Switch & Accessory Modules – ALTIQ Panel Compatible

ALTIQ™ Toyota Square Switch & Accessory Modules – ALTIQ Panel Compatible

Constant / Accessory / USB C + A & Voltmeter

$23.99

ALTIQ™ Toyota Square Switch & Accessory Modules – ALTIQ Panel Compatible

ALTIQ™ Toyota Square Switch & Accessory Modules – ALTIQ Panel Compatible

Constant / Blue + Orange / Left Side Lights

$23.99

ALTIQ™ Toyota Square Switch & Accessory Modules – ALTIQ Panel Compatible

ALTIQ™ Toyota Square Switch & Accessory Modules – ALTIQ Panel Compatible

Constant / Blue + Orange / Right Side Lights

$23.99

ALTIQ™ Toyota Square Switch & Accessory Modules – ALTIQ Panel Compatible

ALTIQ™ Toyota Square Switch & Accessory Modules – ALTIQ Panel Compatible

Constant / Blue + Orange / Work Lights

$23.99

ALTIQ™ Toyota Square Switch & Accessory Modules – ALTIQ Panel Compatible

Factory Interior. Expanded Capability.

The ALTIQ™ Next-Gen Switch Panel transforms the unused lower console cavity in your Ranger, Raptor or Everest into a fully integrated 6-module control hub - without drilling, cutting or replacing factory trim.

Designed specifically for 10” and 12” Next-Gen Ford interiors, it clips directly into place using a precision 9-point retention system, delivering a seamless OEM appearance with serious accessory capability.

Compatible with Next-Gen Ranger, Raptor, Everest & Super Duty.

More switches available here:

ALTIQ™ Square Switches

Modular Command Centre

OEM++

A Next‑Gen interior carries presence.

Large screen. Clean architecture. Intentional design.

Anything added to it should elevate that presence - not interrupt it.

The ALTIQ™ Switch Panel integrates into the lower console cavity with the same confidence as factory design. The soft‑touch matte black aligns with OEM grain, while the gloss accent mirrors the interior’s visual language — creating a finish that feels considered, not installed.

No distractions. No visual clutter. No compromise to the cabin’s identity.

It completes the interior. And once you see it there, it feels like it was always missing.

Direct Integration

No trim removal.
No cutting.
No tools.

Line it up.
Press it in.

In seconds, unused space becomes functional control.

Because the panel utilises the existing lower console cavity, installation is fully reversible and has zero impact on factory warranty.

This isn’t modification.

It’s integration.

9-Point Refined Retention

Serious builds demand confidence.

Rough tracks. Corrugations. Long touring days.

Your control centre should feel as solid as the vehicle itself.

The ALTIQ™ Switch Panel is formed from UV‑stabilised, injection‑moulded ABS in a single unimould structure - delivering structural integrity you can rely on when the terrain turns unpredictable.

Nine integrated clip anchors lock the panel into the console cavity with balanced retention force, ensuring:

• No rattle
• No sagging
• No flex
• No long‑term movement

No visible hardware. No aftermarket compromise.

Just a control system that feels planted, precise and ready for whatever the drive demands.

Build your configuration

We've built the foundations, now you can build your command centre.

Add the accessories you need from our ALTIQ Square Module range:

• Push Switches
• Dual USB Ports
• USB-C Modules
• Volt Meters
• UHF Pass-Through Ports

Configure it now.
Change it later.
Expand it as your build evolves.

Your vehicle grows with your setup - your control system should too.

Intentional Options: 10" or 12"

Ford built the Next‑Gen platform in two interior formats.

We did the same.

• 10” Screen Interior
• 12” Screen Interior

All trims are supported - simply select your infotainment screen size.

Compatibility Table

Vehicle 10" Screen 12" Screen
Ranger XL ✔ —
Ranger XLS ✔ —
Ranger XLT ✔ —
Ranger Sport — ✔
Ranger Wildtrak — ✔
Ranger Platinum — ✔
Ranger Raptor — ✔
Everest Ambiente ✔ —
Everest Trend ✔ —
Everest Sport — ✔
Everest Platinum — ✔

Related How To Guide

Next-Gen OEM+ ControlGrid 6 - Install & Wiring Guide
Next-Gen OEM+ ControlGrid 6 - Install & Wiring Guide
The ALTIQ™ Next-Gen Ranger / Raptor / Everest / Superduty OEM+ ControlGrid 6 is available in both 10" and 12" sizes—while the panels look slightly different, the installation process is... Read more...

Explore More Details

  • Turns unused console space into a 6-module control hub for a clean, centralised setup
  • Supports ALTIQ square modules including switches, USB, USB-C, volt meters and UHF pass-throughs
  • OEM-style integration designed to preserve factory interior aesthetics
  • Installs in seconds with no drilling, cutting or trim removal
  • Fully reversible fitment-remove anytime without trace
  • Rigid unimould construction engineered to reduce vibration and movement
  • 9-point retention system for secure off-road stability and no rattles
  • 10" and 12" variants for precise alignment across Next-Gen interiors

1 x ALTIQ™ Next-Gen Switch Panel (10" or 12")

Vehicle Compatibility Next-Gen Ford Ranger / Raptor / Everest / Super Duty
Variant Options 10" Screen Interior / 12" Screen Interior
Module Capacity 6 x ALTIQ Square Modules
Module Types Supported Switches, USB, USB-C, Volt Meter, UHF Pass-Through (ALTIQ square modules)
Material Injection Moulded ABS (UV Stabilised)
Construction Single-Piece Unimould
Retention System 9 Integrated Clip Anchors
Installation Direct Clip-In | No Trim Removal | Fully Reversible
Warranty Impact None (Non-destructive installation)
Included Panel Only (Modules Sold Separately)
No. Our Switch Panel clips into an existing cavity and does not modify factory structure.
Yes. Installation is fully reversible.
No. This panel is only installs into Next Gen 2022+ Ford Ranger, Raptor and Everest models
No. The 9-point clip system prevents movement under vibration.
Yes. The modular square system allows full custom configuration, just select your switches to install.

You may also like