If you own a Suzuki Jimny, chances are you’ve already looked into upgrading your lighting setup. Whether it’s for weekend exploring or just better visibility at night, a light bar for your Suzuki Jimny is one of the most powerful upgrades you can make. But finding the right light bar solution — one that fits, performs and doesn’t compromise your Jimny’s form — hasn’t been easy… until now.
Introducing the ALTIQ™ Jimny (2018+) 32" LED Light Bar Kit — the only kit designed specifically for the Jimny that installs cleanly without a bull bar, without a rally bar, and without cutting or drilling.
Why This is the Best Light Bar for Suzuki Jimny (2018+)
Unlike generic light bar setups that force you into big compromises, the ALTIQ™ Kit is built exclusively for the JB74 platform. Here’s what makes it stand out:
-
No Bull Bar Required
Most light bar solutions demand a bull bar or aftermarket rack system, adding bulk, weight and cost. Our kit skips all that. -
No Drilling or Cutting
Fully reversible and completely DIY-friendly, our brackets bolt straight into existing mounting points — no permanent modifications required. -
Low-Profile + High Output
Choose between our single-row (stealthy) or double-row (aggressive) 32" Hybrid LED Light Bar options, delivering serious distance and spread — up to 10x more performance than stock high beams. -
Engineered In-House
This isn’t a repurposed universal bracket. We 3D scanned the Jimny front end, simulated stress points, test-fitted multiple versions, and produced a final kit we stand behind with a 10-year warranty.
The Problem With Other Light Bar Mounting Options for the Jimny
When it comes to mounting a light bar on a Suzuki Jimny, most owners face three options — all with major compromises:
| Mounting Option | Pros | Cons |
|---|---|---|
| Bull Bar | Solid base for mounting | Expensive, heavy, often overkill for smaller vehicles |
| Rally Bar / Nudge Bar | Cheaper than bull bar | Usually requires cutting bumper or drilling |
| Roof Rack / Gutter Mounts | High visibility | Adds wind noise, raises vehicle profile, often looks out of place |
The ALTIQ™ Kit? It bypasses all these problems. It fits perfectly behind the grille line — maintaining the Jimny’s compact silhouette while delivering massive output.
Installation – Simpler Than You’d Expect
You won’t need a mechanic, fabrication shop, or any complicated tools. Our Jimny Light Bar Kit is designed from the ground up for easy home installation.
Step-by-Step Installation Overview:
-
Remove the Grille
Rotate the two lower clips under the grille, remove two in the engine bay, and pull the grille forward to disconnect indicators. -
Access Headlight Screws
Undo the screws next to each headlight to prepare for bracket install. -
Install Brackets
Mount the custom ALTIQ™ brackets and secure them using the factory hardware. -
Attach the Light Bar
Bolt the bar onto the bracket arms. Adjust for level, then tighten in place. -
Plug & Play Wiring
Use the included fast-fit harness and our Suzuki Jimny high beam adapter to wire everything up — no splicing required.
From start to finish, the install takes less than half an hour.
How to Install the Under-Mount Brackets for a Perfectly Aligned Light Bar
Dialling in your ALTIQ™ 32" Light Bar for the Jimny (2018+) is as precise as it is simple, thanks to our included bracket guide.
Whether you're using the Single Row or Double Row version of the kit, follow these steps to ensure your light bar sits perfectly straight and central every time:
For Both Bracket Types:
-
Install Rear Under-Mount Brackets — loosely fit the bracket to the back of the light bar.
-
Place the ALTIQ™ Bracket Guide over the bracket, aligning the etched guide lines with the housing edges of the light bar.
-
Slide the Bracket outward so it sits flush against the guide, then push upward to lock its vertical position.
-
Tighten All Bolts to lock in the alignment.
-
Repeat on the Other Side.
The precision guide eliminates the guesswork — ensuring your light bar sits level, centred, and sharp from any angle.
What’s Included in the ALTIQ™ Jimny Kit
Every component is designed to work seamlessly together for a perfect fit and finish:
-
32" Hybrid LED Light Bar (Single or Double Row)
-
Rear Undermount Light Bar Brackets (x2)
- ALTIQ™ Suzuki Jimny Push Switch - Light Bar (x1)
-
Bespoke ALTIQ™ Jimny Brackets (x2)
-
Stainless Steel Hardware + Allen Keys
-
Fast Fit Wiring Harness
-
Suzuki Jimny 2018+ High Beam Adapter
