The ALTIQ™ Rogue MK3 panoramic and blackout covers are designed to be a firm, secure fit with a tool-less install. The three-clip system locks the cover flush against the light and holds it in place regardless of conditions. Follow the steps below for correct fitment. Forcing the cover on incorrectly can damage the clips.
Covers are available in Clear & Amber Panoramic and Blackout finishes, both compatible with the ALTIQ Rogue 8.5" and 7" Driving Lights.
Fitting the Cover
The cover uses three locking clips — one at the top, and one at each bottom corner. Engage them in order:
- Align the cover over the light and slide it upward to engage the top clip first.
- Once the top clip is locked, press in the bottom-left corner to snap the second clip into place.
- Press in the bottom-right corner to engage the third and final clip.
When all three clips are seated, the cover will sit flush with no movement. If it feels loose or uneven, remove it and start again from Step 1 — do not force it.
Removing the Cover
Grip the cover by the sides where the DRLs are visible and pull forward firmly. The clips will release cleanly.
